Fuel Gauge Sender: Service and Repair

Sender For Fuel Gauge, Removing And Installing

Removing

NOTE:
- The fuel tank must not be more than 1/4 full.
- Empty fuel tank if necessary.
- Observe safety precautions before performing repair work.

- Remove flange, Fuel delivery unit.







- While pressing retaining tab, pull out Sender for fuel gauge -G- from baffle housing in fuel tank - arrows -.

Installing
- Insert Sender for fuel gauge -G- in guide on baffle housing and press down until it engages.
- Install flange of fuel delivery unit, Fuel delivery unit, removing and installing.