Condenser, Removing and Installing

Condenser, Removing And Installing

NOTE:
- Before carrying out any work on the A/C refrigerant system, refer to all CAUTIONS and WARNINGS in A/C refrigerant system safety measures.
- Service refrigerant system using Kent More ACR 4 or equivalent
- During servicing, all couplings, fittings and related fasteners must be torqued to specifications.

Removing
- Discharge refrigerant system.
- Bring front end assembly (lock carrier) into service position
- Vehicles from 10.00: Remove front bumper carrier
- Loosen and separate refrigerant pipes/couplings from condenser.

CAUTION: Immediately plug open connections on A/C components and lines to prevent dirt and moisture contamination.

Installing
- Install in reverse order of removal, noting the following:
- Evacuate and recharge refrigerant system.
- Perform leak test.