Input Shaft, Output Shaft (Pinion Shaft), Differential and Selector Forks, Removing and Installing

Input shaft, output shaft (pinion shaft), differential and selector forks, removing and installing, 02J, 5 Spd. M/T





1. Differential
2. Oil seal
^ Qty. 4
^ Always replace

3. Output shaft
4. Reverse shaft support
5. Reverse shaft
6. Input shaft
7. Reverse gear selector fork
^ Installation position

8. Torx socket head bolt, 25 Nm
9. Selector mechanism
^ (Selector forks)

10. Clutch housing
11. Hex nut, 25 Nm and then turn 90°further
^ 4 nuts for bearing support

12. Flange shaft with spring
13. Cone head bolt, 25 Nm