Driver's Airbag Unit, Assembly Overview

Driver's Airbag Unit, Assembly Overview







1. Steering wheel
- Observe installation position when installing.
2. Connector(s)
- Drivers airbag unit can have 1 or 2 connectors, 1 for units with Igniter 1 and 2 (green and orange) for units with Igniter 2.
3. Multi-point socket head bolt
- 60 Nm
- Equipped with locking compound
- Can be used up to 5 times
Mark with a center punch mark after each reinstallation
4. Airbag unit
5. Locking hook
- Release from rear of steering wheel
6. Securing plate
7. Return spring with slip ring