Throttle Position Sensor: Service and Repair

Engine Electronic Power Control (EPC) Components, Servicing







NOTE: Components marked with * are tested via On Board Diagnostic (OBD). Diagnostic mode 3: Check DTC memory.

1. Mounting bracket
2. Connector
- Black, 6-pin
- Terminals are gold-plated
3. 10 Nm
4. Throttle Position (TP) sensor -G79- and Sender 2 for accelerator pedal position -G185-*
- Not adjustable
- Throttle Position (TP) sensor communicates the driver's intentions to the Engine Control Module (ECM)
5. Bracket
- For footwell cover
- Clipped in at Throttle Position (TP) sensor