Three Way Catalytic Converter (TWC), Checking

Three Way Catalytic Converter (TWC), Checking

Function test
- Select measuring value 'Test-ID 01: Catalytic converter" and check whether specified values are being reached. Diagnostic mode 6: Check test results of components that are not continuously monitored, Diagnostic Mode 6: Check Test Results of Components That Are Not Continuously Monitored
- End diagnosis and switch ignition off.

If specified values are exceeded:
- Replace front exhaust pipe with catalytic converter.

Continued for all vehicles
- Erase DTC memory of Engine Control Module (ECM). Diagnostic mode 4: Reset/erase diagnostic data. Diagnostic Mode 4: Reset/Erase Diagnostic Data
- Generate readiness code. Monitors, Trips, Drive Cycles and Readiness Codes