Brake System, Bleeding (Not Using Brake Filler and Bleeder Unit)

Brake system, bleeding (not using brake filler and bleeder unit)
- Connect bleeder bottle hose and open bleeder screw.
- Pump brake fluid through system by pumping brake pedal.

Make sure there is sufficient brake fluid in brake fluid reservoir at all times.
- With brake pedal held down, close bleeder screws.
- Repeat operation until no air escapes.

Bleeding sequence

Pre-bleeding the brake system when at least one chamber in the brake fluid reservoir is completely empty (e.g. leaks in braking system).

Bleeding sequence

Change of brake fluid Changing brake fluid