License Plate Bulb: Service and Repair

License Plate Light Bulb, Replacing

Removing
- Remove license plate light.







- Turn bulb holder in direction shown -arrow- and remove from housing.
- Pull out bulb (12 V/5 W), do not turn.

Installing

CAUTION: Do not touch the glass portion of the bulb with bare hands. The moisture and/or grease from fingers that evaporates on the bulb during operation, can cause the glass to cloud over.

- Install in reverse order of removal.
- When installing, make sure bulb holder engages in housing by turning in opposite direction shown -arrow-.