Electrical & Electronic Components

Electrical & Electronic Components, Locations







CAUTION:
Before beginning repairs on the electrical system:
- Obtain the anti-theft radio security code.
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.
- Disconnect negative ( - ) battery terminal.
- When disconnecting and reconnecting battery terminals, observe all applicable Notes and torque specifications, as well as instructions on performing OBD program and electrical system function checks as specified.

1. Instrument cluster -K-
- Monitored by OBD
2. Engine coolant temperature (ECT) sensor -G2-
- Location depends on type of engine
- Monitored by OBD
3. Speedometer vehicle speed sensor (VSS) -G22-
- Location See Fig. 5
4. Sender for fuel gauge sender -G-
- Location See Fig. 6
- Monitored by OBD
5. Outside air temperature sensor -G17-
- Location See Fig. 7
- Monitored by OBD

Fig. 5 Speedometer vehicle speed sensor (VSS) -G22-







The speedometer sensor -arrow- is located in the area of the left-hand drive shaft flange on manual and automatic gearbox vehicles.

Fig. 6 Sender for fuel gauge sender -G-







The sender for fuel gauge -G- is located in the fuel tank on the fuel delivery unit -arrow-.

Fig. 7 Outside air temperature sensor -G17-







The outside air temperature sensor -G17- is located on left of front bumper behind the outer air grille.

Unclip air grille to remove sender.