Crankshaft Stop - AST Tool # T 10100

Crankshaft Stop

AST tool# T 10100








Used to lock the crankshaft in place during timing belt replacement. Applicable to: 4 Cylinder 1.9L and 2.0L (gas) engine, 2 and 4-valve diesel engines equipped with an oval crankshaft pulley, to adjust valve timing (TDC marking at 1 o'clock). Use of the oval belt pulley will be gradually phased in.

- Used on 4 Cylinder 1.9L and 2.0L (gas) engine, 2 and 4-valve diesel engines equipped with an oval crankshaft pulley, to adjust valve timing (TDC marking at 1 o'clock)
- Also TDI Engine code BRM with oval pulley

Contact AST for pricing.

Assenmacher Specialty Tools
1-800-525-2943

This Tool is also available in the following kits:



6800TDI - TDI Timing Belt Tool Set