Evaporative Emissions System

EVAP Canister System Overview, (Vehicles With Engine Code BEV, BGD)







1. Tank lid unit
- With rubber cap
2. Fuel tank
3. Fuel pump (FP) unit
4. Intake hose
5. Throttle valve control module -J338-*
6. Upper section of intake manifold
7. Fuel rail with fuel injectors
8. Fuel filter
- Installation position: Arrow points in direction of flow
- With fuel pressure regulator
9. Evaporative Emission (EVAP) canister purge regulator valve-N80-*
- Installation position: Arrow points in direction of flow
10. Gravity valve
11. Pressure retention valve
12. Change-over valve
13. EVAP canister
- Under wheelhousing liner in right rear wheelhousing
14. Leak Detection Pump (LDP) -V144-*
- Under wheelhousing liner in right rear wheelhousing
15. Air filter for leak detection pump.