Brake Pedal, Removing and Installing

Brake pedal, removing and installing

Removing
- Remove trim below instrument panel.





- Remove screws - 1-.
- Remove cover - A -.





- Remove connecting plate between clutch and brake pedals on vehicles with a manual transmission.
- Remove brake light switch - 1 - for models "Old Style" by turning counter-clockwise 90°.
- Remove brake light switch - 1 - for models "New Style" by turning counter-clockwise 45°.
- Unhook throttle cable.
- Vehicles with accelerator pedal position sensor, release connector below instrument panel.
- Separate brake pedal from brake booster.
- Remove hex nuts.
- Remove pedal cluster.
- Remove brake pedal.

Installing
Installation is carried out in reverse sequence of removal.
- Adjust brake light switch.