ABS Mark 60

Electrical/electronic components and installing locations





13- Right/left rear ABS wheel speed sensor -G44-/-G46
^ Checked by OBD
^ Before inserting the sensor clean the inner surface of the sensor mounting and coat with lubricating paste G 000 650
^ When connecting the speed sensor wire make sure it is not twisted in the wheel housing
^ Tightening torque of bolt: 10 Nm (7.4 ft lb)
15- Wheel hub with rotor for speed sensors
^ Rotor and speed sensors for rear left and right-hand sides are identical
16- Wheel hub with rotor for speed sensors
^ Rotor and speed senders for front left and right-hand sides are identical
17- Right/left front ABS wheel speed sensor -G45-G47
^ Checked by OBD
^ Before inserting the sensor clean the inner surface of the sensor mounting and coat with lubricating paste G 000 650
^ When connecting the speed sensor wire make sure it is not twisted in the wheel housing
^ Tightening torque of bolt: 10 Nm (7.4 ft lb)