Drive For Sliding/Tilting Sunroof, Adjusting ("0" Position)

Drive For Sliding/Tilting Sunroof ("0" Position), Adjusting

There may be a requirement to adjust the "0" position if the drive was removed when not in the "0" position or the sliding/tilting sunroof was closed using the emergency key.

Drive removed but still connected electrically.
- Select "Tilt sunroof" with preselection control rotary switch.
- Select "Close sunroof" with preselection control rotary switch.
- Select "Open sunroof" with preselection control rotary switch.
- Select "Close sunroof" with preselection control rotary switch.
- Install drive in this position ("0" position) with sliding/tilting sunroof closed.