Radio Frequency Remote Control Batteries, Removing and Installing

Radio Frequency Remote Control Batteries, Removing and Installing







1. Button for unlocking Vehicle
2. Button for locking Vehicle
3. Button for rear compartment door release
4. Panic button (horn/signal lights)







1. Upper housing (transmitter with buttons)
2. Battery
3. Metal contact
4. Battery
5. Lower housing

Removing







- Using screwdriver or coin, separate upper housing from lower housing.







- Using screwdriver, remove upper battery -1- from bracket -2- in direction of arrow.







- Metal contact -1- has two straight edges. Turn these edges toward catches and remove metal contact.
- Remove lower battery using screwdriver.

Installing
When installing batteries, make sure batteries are installed correctly according to polarity.







- Install battery -4- positive side down in lower housing -5-.
- Place metal contact -3- on battery -4-.
- Place battery -2- plus side down on metal contact -3- and lock in place.
- Attach upper housing -1- with transmitter to lower housing -2- and lock in place.