Flap Servomotor, Removing and Installing

Flap Servomotor, Removing and Installing

For vehicles with power convertible top without large flap base and flap servomotor from 06.04 to 11.04, flap servomotor is installed in right rear side of luggage compartment, just like a by pass meanwhile convertible top control unit is modified to do this function.

Removing
- Remove right luggage compartment trim.







- Remove flap servomotor -1- connections -arrow-..
- Loose support nuts -2-.
- Remove flap servomotor with support -3-.

NOTE: Control unit for parking distance control also will be fixed to support if vehicle has this system).

- If necessary remove screws -4- from support.

Installing
- Install in reverse order of removal.