Rear Lid Lock, Removing and Installing (USA)

Rear Lid Lock, Removing And Installing (USA)







1. Rear lid release motor
2. Emblem
3. Rear lid
4. Lock
- Removing:
- Removing tailgate trim.
- Disconnect connector on lock.
- Unhook operating hook --, unscrew bolts -- and take lock off tailgate.
5. Bolt
- 23 Nm
6. Lock plate
- Adjust - within elongated holes
- Removing:
- Remove load sill trim.
- Unscrew bolts --.
7. Bolt
- 23 Nm
8. Operating rod