Input Shaft, Output Shaft (Pinion Shaft), Differential and Selector Forks, Removing and Installing

Input shaft, output shaft (pinion shaft), differential and selector forks, removing and installing, 02J, 5 Spd. M/T





1 - Differential
2 - Oil seal
^ Qty. 4
^ Always replace

3 - Output shaft
4 - Reverse shaft support
5 - Reverse shaft
6 - Input shaft
7 - Reverse gear selector fork
8 - Torx socket head bolt, 25 Nm
9 - Selector mechanism
^ (Selector forks)

10 - Clutch housing
11 - Hex nut, 25 Nm and then turn 90° further
^ 4 nuts for bearing support

12 - Flange shaft with spring
13 - Cone head bolt, 25 Nm