Brake Pedal, Removing and Installing

Brake pedal, removing and installing

Removing
- Remove trim below instrument panel.





- Remove screws -1-.
- Remove cover -A-.

Vehicles with manual transmission





- Remove connecting plate between clutch and brake pedals on vehicles with a manual transmission.

Continued for all vehicles
- Remove brake light switch -1-.
- Disconnect accelerator cable.
- Vehicles with accelerator pedal position sensor, release connector below instrument panel.
- Disconnect brake pedal from brake booster.
- Remove hex nuts item -2-.
- Take out pedal cluster.
- Remove brake pedal.

Installing
Install in reverse order.
- Adjust brake light switch.