02M, 5 and 6 SPD. M/T

Hydraulic components, assembly overview, 02M, 5 and 6 Spd. M/T





1 - Brake fluid reservoir
2 - Supply hose
3 - Clutch master cylinder
4 - Bearing bracket
^ Only replace with clutch master cylinder removed
^ Remove go to Fig. 1
^ Install go to Fig. 2

5 - Clutch pedal

6 - Hex nut, self-locking, 25 Nm
^ Always replace

7 - Oil seal
^ Always replace
^ Pull onto line/hose connection
^ Moisten with brake fluid before installing

8 - Line/hose assembly
^ Check Parts catalog for application

9 - Bracket
^ Secured to body

10 - Oil Seal
^ Always replace

11 - Bleeder
12 - Oil Seal
^ Always replace
^ Pull onto line/hose connection
^ Moisten with brake fluid before installing

13 - Clip
^ To remove and install line/hose assembly, pull out clip onto stop

14 - Bleeder valve
^ Bleeding clutch system

15 - Protective cap
16 - Clip
^ To remove and install line/hose assembly, pull out clip onto stop

17 - Slave cylinder
18 - Clip
^ To remove and install line/hose assembly, pull out clip onto stop





Fig. 1 Remove retainer -A- by prying in direction of arrow





Fig. 2 Install clutch master cylinder operating rod in retainer -A- (direction of arrow)