Dimmer Switch: Service and Repair

Instrument Panel Light Dimmer/Switch -E20-, Removing And Installing

NOTE: European-only market dimmer/switch that includes manual headlight beam adjuster is illustrated here. Procedure is the same for USA/CDN models.

CAUTION:
Before beginning repairs on the electrical system:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.

Removing
- Apply tape to instrument panel in area around switch in order to protect instrument panel.







- Carefully pry out switch housing from installation frame using screwdriver as illustrated.
- Pull out switch and disconnect electrical connector.

Installing
- Connect electrical connector.
- Insert headlight adjuster in guide on mounting frame and press in.