Steering Column, Identification

Steering column, identification





From vehicle identity No. 1J-XB 095 035 a steering column from Presta was introduced.

The previous steering column from Nacam is also used.

The function of the height and reach adjustment is identical in both steering columns.

Both versions are supplied as replacement parts.

When replacing a steering column, use a steering column from the same manufacturer.

Before removing steering column, check which version is installed in vehicle.

Identifying steering column
A - Steering column

Manufacturer; Nacam

1 - Transportation securing device
^ Remove first after steering column is installed

2 - Steering column
The steering column is not visible in area

3 - Steering column universal joint/shaft
4 - Hex bolt, 22 Nm
^ Installed without locking fluid

B - Steering column

Manufacturer; Presta

1 - Transportation securing device
^ Remove first after steering column is installed

2 - Steering column
The lower part of the steering column is visible

3 - Steering column universal joint/shaft
4 - Hex bolt, 22 Nm
^ Inserted with locking fluid
^ Use locking fluid D 000 600