Front Seatbelt With Belt Tensioner, Assembly Overview

Front Seatbelt, Assembly Overview (With Belt Tensioner)

CAUTION: Before beginning disassembly, straightening or or body repair work, belt tensioning units must be removed.







1. Seatbelt height adjuster
- To remove height adjustment mechanism, upper B-pillar trim must be removed first
2. Cylinder bolt
- 23 Nm
3. Belt relay
4. Concealment cap
5. Hex bolt
- 40 Nm
6. Belt latch
7. Connector
- Only with electrical belt tensioners
8. Seatbelt with belt tensioner
9. Hex bolt
- 40 Nm
10. Hex bolt
- 40 Nm
11. Screws
- Qty. 2, 1.5 Nm
12. Belt guide