Crankshaft Main Bearing: Specifications

Crankshaft main bearing cap bolts 65 Nm plus an additional 90° (1/4 turn)
Replace

Crankshaft
Axial play
New 0.07 to 0.23 mm
wear limit 0.30 mm
Radial clearance 0.01 to 0.04 mm
Wear limit 0.15 mm





Cylinder block crankshaft bearing shells identification
From the factory, the upper bearing shells are allocated to cylinder block with the correct thickness. Colored spots serve to identify bearing thicknesses.

Arrow points in direction of travel.

The letters marked on lower sealing surface of cylinder block identify which bearing thickness must be installed in which location.

Color identification

Color identification:

The crankshaft bearing shells in the bearing caps are only available as a replacement part with a "yellow" color marking.