FS III Front Brake Calipers, Servicing

FS III front brake calipers, servicing





Note:
^ When carrying out repairs install all parts supplied in repair kit.
^ New brake calipers are filled with brake fluid and are pre-bled.
^ Apply thin coat of lubricant G 052 150 A2 to brake cylinders, pistons and seals.

1- Protective seal
2- Bleed valve
^ Apply thin coat of assembly lubricant G 052 150 A2 to threads before screwing in
3- Cap
^ Insert in mounting bushing
4- Guide pins, 30 Nm (22.1 ft. lb)





5- Mounting bushing
^ Insert into brake caliper housing
6- Brake caliper housing
7- Protective seal
^ Do not damage when inserting piston
8- Piston
^ Apply thin coat of assembly lubricant G 052 150 A2 to piston before inserting
9- Seal