FN 3 Front Brake Calipers, Servicing

FN 3 front brake calipers, servicing





Note:
^ Install all parts supplied in repair kit.
^ New brake calipers are filled with brake fluid and are pre-bled.
^ Apply thin coat of assembly lubricant G 052 150 A2 to brake cylinders, pistons and seals.

1- Protective seal
2- Bleeder valve
^ Apply thin coat of assembly lubricant G 052 150 A2 to threads before screwing in
3- Cap
^ Insert in mounting bushing





4- Guide pins, 30 Nm (22.1 ft. lb)
5- Mounting bushing
^ Insert into brake caliper housing
6- Brake caliper housing
7- Brake carrier
^ Install on brake caliper housing
8- Retaining spring
^ Insert with both ends in the holes in brake caliper housing
9- Seal





10- Piston
^ Apply thin coat of assembly lubricant G 052 150 A2 to piston before inserting
11- Protective seal
^ Do not damage when inserting piston