Overhaul

Front brakes, 2FN brake caliper, Servicing





Note:
^ When carrying out repairs install all parts supplied in repair kit.
^ New brake calipers are filled with brake fluid and are pre-bled.
^ Apply thin coat of assembly paste G 052 150 A2 to brake cylinders, pistons and seals.

1- Dust cap
^ Push onto bleeder valve
2- Bleeder valve
^ Apply thin coat of assembly paste G 052 150 A2 to threads before screwing in
3- Cap
^ Insert in mounting bushing





4- Guide pin, 25 Nm
5- Mounting bushing
^ Insert into brake caliper housing
6- Brake caliper housing
7- Brake carrier
^ Install on brake caliper housing
8- Retaining spring





9- Seal
10- Piston
^ Apply thin coat of assembly paste G 052 150 A2 to piston before inserting
11- Protective seal
^ Do not damage when inserting piston