Fuel Door Release Actuator: Service and Repair

Fuel Flap Unit, Removing And Installing (Golf)







1. Tank flap unit

- Removing
- Remove fuel tank cap.
- Press back release rod by operating remote unlocking.
- Remove bolt.
- Remove rubber part of tank filler flange and swivel out fuel flap unit from side panel.

- Installing:
- Assembly piece and actuator element are installed.
- Install fuel flap unit (rubber part rolled up) with hinge side first.
- Bolt in fuel flap unit and assembly piece.

2. Screw
3. Tank flap cup
- Removing and installing (can only be removed as part of fuel flap unit)
- To remove fuel filler cap, press out securing pin in fuel flap unit
4. Drain hose
5. Side panel
6. Release rod
7. Actuator for fuel filler flap
8. Seal
9. Assembly piece
- Inserted into side panel
10. Rubber piece