Rear Bumper Reinforcement: Service and Repair

Rear Bumper Carrier, Assembly Overview

NOTE: Slight changes may have to be made to removal and installation procedures, depending upon equipment installed in vehicle.







1 - Bumper carrier
2 - Impact absorber, left
3 - Screw
- Qty. 4
- 1.5 Nm

4 - Mounting strip
5 - Guide piece
- To remove and install, pull out/slide in bumper cover parallel out of guide pieces (left and right sides)

6 - Screw
- Qty. 10
- 1.5 Nm

7 - Expanding nut
- Qty. 10

8 - Internally threaded pop rivet
- Qty. 2

9 - Expanding nut
- Qty. 4

10 - Bolt
- Qty. 2
- 6.6 Nm

11 - Impact absorber, right
12 - Bolt
- Qty. 4
- 20 Nm

13 - Nut
- Qty. 2
- 50 Nm

14 - Bolt
- Qty. 2
- Only tighten