Bumper Cover, Removing and Installing

Bumper cover, removing and installing

Removing





- Disconnect release lever from lid lock, refer to Release lever, removing. Service and Repair
- Remove radiator grille, refer to Radiator grill, removing and installing. Service and Repair
- If equipped, remove covers -7- for headlight cleaning system from bumper cover and unclip.
- Remove bolts -5- securing bumper cover -1- to wheelhousing -4-.
- Unclip left air guide grille -9- and right air guide grille -11-.
- Remove bolts connecting bumper cover -1- to sound insulation on left and front underbody.
- Remove bolts -2-.
- Remove bumper cover -1- from guide pieces -3- (left and right).
- Disconnect connector from temperature sensor.
- Remove spoiler -8- if necessary

Installing

- Installation is performed in reverse order of removal.