Gear Set, Adjusting and Marking

Gear set, adjusting and marking, 012/01W, 5 SPD. M/T





1 - Identification "0937" means the Oerlikon gear set with a ratio of 37:9.

2 - Pairing number "312" for gearing set

3 - Dimension "r" is based on the master gauge used on the test bench during production. Dimension "r" is always given in 1/100 mm. Example: "25" means r = 0.25 mm

Ro - Length of test machine master gauge

Ro - Ring gear-diameter 170 mm = 54.95 mm

Ro - Ring gear-diameter 180 mm = 59.65 mm

R - Actual dimension between ring gear axis and face of drive pinion in position of quietest running for this gear set

Vo - Hypoid offset