New Clutch Pedal Switch F36, Installing (Clutch Pedal Switch Is Secured In Mounting Bracket Using Securing Clip)

New Clutch Pedal Switch F36, installing (clutch pedal switch is secured in mounting bracket using securing clip), 012/01W, 5 SPD. M/T
In order to assure sufficiently secure fitting, clutch pedal switch must not be installed more than once.

Removing
^ Remove drivers side storage compartment.
^ Disconnect connector at Clutch Pedal Switch.
^ Remove switch from securing clip.

Installing
In order to assure sufficiently secure fitting, clutch pedal switch must not be installed more than once.
^ Clutch pedal not operated.





^ Press in new switch - 1 - into mounted securing clip - 2 - until stop of clutch pedal.
^ Check/adjust clutch pedal switch.
^ Connect harness connector.