Brakes and Traction Control

Diagnostic Trouble Code (DTC) table

Note: For DTC table
^ The DTC table lists all malfunctions that can be recognized by the ABS control module -J104- and printed out by the VAG1551 scan tool.
^ The DTC appears (in operating mode "Rapid Data Transfer") only on the print-out.
Example:
DTC
5-digit
00277

^ The column "Printed output from VAG1551 Scan Tool (ST)" contains notes regarding the type of malfunction.
^ The column "Corrective action" refers to specific test steps of the Electrical Test.
^ Sporadically occurring malfunctions are identified via indication of "/SP" on the right-hand side of the display.
^ Static malfunctions that cannot be detected when the vehicle is stationary are also identified with "/SP" if the ignition has been switched off and then on again.
^ Before replacing the component determined to be faulty, check all relevant harness connectors, wires and Ground (GND) connections according to wiring diagram.