Turbocharger, Assembly Overview - I

Turbocharger, Assembly Overview







1. Turbocharger (TC) Intake Temperature Sensor -G507-*, 45 Nm
2. Exhaust manifold
3. 25 Nm
- Always replace
- Coat stud bolt threads with "G 000 500".
4. Intake manifold
- With Motor for intake flap -V157-
5. From charge air cooler
6. Gasket
- Always replace
7. 25 Nm
8. Gasket
- Always replace
- Note installed position
9. Bracket
- For shielding plate.
10. Washer
11. Heat shield
- Engages in bracket.
12. Pressure unit
- For boost pressure regulation
- Part of turbocharger, cannot be replaced
13. Turbocharger
- Fill with engine oil at filler tube before threading on oil supply line
14. From crankcase ventilation
15. From air filter
16. Gasket
- Always replace
17. 15 Nm
18. Seal
- Always replace
19. Connecting piece, 40 Nm
20. Oil return line, 25 Nm
- To cylinder block
21. Bracket
22. To charge air cooler
23. Gasket
- Always replace
24. Front exhaust pipe
25. Vacuum hose
- To wastegate bypass regulator valve -N75-
26. Connecting piece, 30 Nm
- Always replace
- Coat threads and bolt head contact surface with G 052 112 A3
- Fill with engine oil at filler tube before threading on oil supply line
27. 10 Nm
28. Oil supply line
- From oil filter bracket
- Fill with engine oil at filler tube before threading on oil supply line
- Removing and installing oil supply line
29. Bracket
- For oil supply line
- Secure oil supply line before installing
- Removing and installing oil supply line
30. Mounting nuts