Rules For Cleanliness - II

Rules For Cleanliness

When working on turbocharger, carefully observe the following rules of cleanliness:
- Thoroughly clean all connections and the surrounding area before disconnecting.
- Place parts that have been removed on a clean surface and cover them. Do not use fluffy cloths.
- Carefully cover over opened components or seal, if repairs are not performed immediately. Only install clean components:
- Only unpack replacement parts immediately prior to installation. Do not use parts that have been stored loose (e.g. in tool boxes etc.).
- Supplied transport and protective packaging and sealing caps should only be removed immediately before installing.
- During repair, clean oil from connections and hose ends.
- When the system is open: Avoid working with compressed air if possible. Do not move vehicle unless absolutely necessary.