Bearing Plate, Torsen Differential and End Cover, Removing and Installing

Bearing plate, Torsen differential and end cover, removing and installing





1. Bearing plate
2. Bolt, 25 Nm
^ Qty 6
3. Dished spring
^ Installed position: greater diameter (concave side) facing shims
4. Washer
5. Oil diverter
6. Multi-point socket head bolt, 150 Nm
7. 2nd inner race for 4-point bearing
8. Spring
9. Torsen differential
10. Bolt, 25 Nm
^ Qty 5
11. End cover
12. Gasket
^ Always replace
13. Dowel sleeve
^ Qty 2
14. Manual transmission
15. Oil drain plug, 40 Nm
16. Magnet
^ Qty 2
^ Clean
17. Support plate
^ Installed position: Tab facing magnet
18. Bolt, 25 Nm
^ Qty 2