Modified Synchronization 3RD and 4TH Gear As of Transmission Manufacture Date 23 06 3

Modified synchronization 3rd and 4th gear as of transmission manufacture date 23 06 3, 012/01W, 5 SPD. M/T

Note:
^ As of transmission manufacture date 23 06 3 new synchronizer rings with larger friction cone and smaller toothing for 3rd and 4th gear are installed. Dive gears, operating sleeve and synchronizer are adapted accordingly and cannot be installed together with synchronizing parts of the previous construction version.

The following components were modified:
^ Smaller toothing - arrows A -
^ Synchronizer rings with larger friction cone - arrows B -





1. 3rd gear
2. Synchronizer ring for 3rd gear
3. Synchronizer ring for 3rd gear
4. Synchronizer hub for 3rd and 4th gears
5. Operating sleeve for 3rd and 4th gears
6. Synchronizer ring for 4th gear
7. Synchronizer spring for 4th gear
8. 4th gear