Multi-Pin Harness Connector With Terminal Assignments

Multi-pin harness connector with terminal assignments

Note: All terminals omitted here are not occupied at the moment and must not be connected to other components under any circumstance.





Terminal assignment of harness connector, wiring harness / ABS control module (w/EDL) -J104-





Terminal assignment of harness connectors for voltage supply and On Board Diagnostic (OBD) with VAG1551 Scan Tool (ST)

Terminal = Ground (GND) (terminal 31)
4
Terminal = B+ (terminal 30) via S21
16
Terminal = K-wire to ABS control module (w/EDL) -J104- terminal 11 via connection in instrument cluster wiring harness (A76)
7








Wire Connection to Component





Overview of test steps