Body Side, Overview

Cooling system components (body side), overview






1. Radiator
Removing and installing, refer to Radiator - Service and Repair - Procedures Service and Repair
After replacing, replace all coolant
With ATF cooler on vehicles with automatic transmission, refer to Transmission and Drivetrain - Automatic Transmission/Transaxle - Fluid Line/Hose, A/T - Service and Repair - Procedures Service and Repair
Cleaning ATF cooler, refer to Transmission and Drivetrain - Automatic Transmission/Transaxle - Fluid Line/Hose, A/T - Service and Repair - Procedures Service and Repair

2. Securing clip
3. Securing rubber

4. O-ring
Replace if damaged

5. Lower coolant hose
Secured to radiator with retaining clip
Check securely seated
Coolant hose connection diagram, refer to Radiator Hose - Diagrams - Mechanical

6. Rubber washer
7. Locking bolt
8. 10 Nm

9. Fan ring
Clipped into air ducting and secured with securing bolt item 7

10. 2 pin - connector

11. Radiator fan (V7)
Checking, refer to Cooling Fan, Radiator - Cooling Fan Motor - Testing and Inspection - Procedures Testing and Inspection

12. Connector
Black, 3 pin
For radiator fan thermo switch

13. Radiator fan thermo switch (F18) 35 Nm
For electric fan
Switching temperatures:
Stage 1 on: 92 - 97° C, off: 84 - 91° C
Stage 2 on: 99 - 105° C, off: 91 - 98° C

14. Seal
Always replace

15. Drain screw, 10 Nm

16. Upper coolant hose
Secured to radiator with retaining clip
Check securely seated
Coolant hose connection diagram, refer to Radiator Hose - Diagrams - Mechanical