4 Speed Automatic 01M

Final Drive oil level, Checking (auto trans.)





- Remove speedometer drive, wipe clean with a cloth and install again.
- Remove speedometer drive and check oil level.
- The oil level must be between MIN and MAX.

Note:
- The difference between MIN and MAX markings is 0.1 L (0.1 qt).

If the oil level is too low, top off with:
Transmission fluid SAE 75 W90 (Synthetic-oil). This transmission fluid is available as follows:
Size 1.0 Liter Part No. G 052 145 A2

- If oil level is too high, suction out oil with V.A.G. 1358 A or equivalent.
- Install speedometer drive