Fuel Pressure Regulator: Locations

Evaporative Emissions (EVAP) system, assembly overview





Engine codes BEV, BGD
1. Tank flap unit
2. Fuel tank
3. Fuel delivery unit
4. Intake hose
5. Throttle valve control module -J338
6. Intake manifold upper part
7. Fuel rail with injectors
8. Fuel filter
^ Installed position: Arrow points in direction of flow
^ With fuel pressure regulator
9. EVAP canister purge regulator valve -N80-
^ On right in engine compartment above wheelhousing liner
^ Installed position: Arrow points in direction of flow
^ Valve will be activated by engine control module (pulsed)
10. Gravity valve
11. Pressure retention valve
^ For fuel tank breather
^ Checking; Refer to Fig. 3
12. Change-over valve
^ Checking; Refer to Fig. 2
13. EVAP canister
^ In right rear wheelhousing, behind wheelhousing liner
14. Leak Detection Pump (LDP) -V144
^ In right rear wheelhousing, behind wheelhousing liner
^ Valve will be activated by engine control module (pulsed)
15. Air filter for leak detection pump