Brake Pedal From Brake Booster, Disconnecting

Brake pedal from brake booster, disconnecting
Special tools and equipment





^ T 10006 Release tool

- Remove trim below instrument panel.





- Remove screws -1-
- Remove cover -A-.





- Remove connecting plate between clutch and brake pedals -arrows- on vehicles with manual transmission.
- Remove brake light switch -1-.





- First press brake pedal in direction of brake booster and hold.
1. Brake pedal
2. Push rod
3. Retaining tabs
- Insert special tool T 10006 and pull in direction of driver's seat, when doing this counter-hold on brake pedal (at this moment the pedal must not be allowed to move backward). Thereby the mounting retaining tabs -3- will be pressed off the ball head of the push rod -2-.

Note: For ease of illustration separating the brake pedal from the brake booster is shown with the pedal cluster removed.

- Remove special tool T 10006 and brake pedal together toward the driver's seat (thereby the brake pedal will be pulled off the ball head of the push rod).

Joining brake pedal to brake booster





- Hold push rod ball head in front of mounting and push brake pedal in direction of brake booster, so the ball head audibly snaps.
- Further installation is performed in reverse order of removal.
- Then adjust brake light switch.
- Brake light switch: adjusting, Refer to Lighting and Horns, Brake Light Switch, Adjustments