Front and Rear Bass Loudspeakers, Removing and Installing

Front And Rear Bass Loudspeakers, Removing And Installing

Removing
- Remove door trim panel, (or rear trim panel)
- Disconnect harness connector.







- Carefully drill out rivets (arrows) with suitable drill and remove loudspeaker.


CAUTION!
- To prevent corrosion, make sure that all metal particles from drilling are removed from inside the door.
- If the paint on door frame is damaged during drilling, touch-up immediately.


Installing
- Secure loudspeaker with locally available pop rivets of proper length and diameter.


NOTE: Do not forget rubber ring between door trim and loudspeaker when reinstalling door trim.