Window Flange, Preparing For Glazing

Window Flange, Preparing For Glazing







- Cut back remaining material using scraper V.A.G 1561/8, do not remove all residue under any circumstance.

NOTE:
- Residual material acts as a base for the new adhesive sealing material. Keep adhesive surface free of dirt and grease.
- Activator must not come into contact with the paint - otherwise paint will be damaged.

Exception: If bonding is not performed immediately after cutting back, the remaining material must be activated using the Activator D 181 801 A1.

- If body flange is being worked on or is partially replaced, it must be cleaned and primed again after painting the corresponding area.