Retaining Plate, Removing and Installing

Retaining Plate, Removing And Installing

NOTE:
- Retaining plate can also be removed with side window. To do so, upper adjuster must be bolted in completely.
- If side inclination (side distance) is not suitable, it can be corrected via adjuster at carrier plate.
- To do so, side window must be installed.

Removing
- Remove side window.
- Disconnect harness connector for window regulator.
- Remove lower installation opening cap.







- Loosen combination nuts in installation openings - arrows
- Remove carrier plate upward via recess.

Installing
Installation is performed in the reverse order of removal.

NOTE: After installing, check side window adjustment.