Clearing Trouble Codes - 4 Speed Automatic 01M

Requirement:
- DTC memory has been checked.

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -5- to select "Erase DTC memory" function 05.

Indicated on display


Rapid data transfer Q
05 - Erase DTC memory


- Confirm entry with -Q- button.

Display reads


Attention!
DTC memory has not checked


NOTE:
- If the ignition was switched OFF between checking the DTC memory and erasing the DTC memory the DTC memory will not be erased.
- Always adhere to the sequence of operations, i.e. first check the DTC memory


Indicated on display


Rapid data transfer ->
DTC memory is erased


(The DTC memory will be erased approx. 5 secs. after the display appears.)


NOTE: Wait about 1 minute before checking the DTC memory again.

Indicated on display


System cannot be checked!


Print out with printer switched ON


1 DTC recognized!
00811 3333
System cannot be interrogated


The Transmission Control Module -J217- was not given sufficient time to recognize malfunctions.
- Wait about 1 minute before checking DTC memory again.
- After checking and erasing DTC memory, test drive vehicle and check DTC memory again.

The following display should appear.

"No DTC recognized!"