4 Speed Automatic 01M

Checking:





^ Remove air cleaner
^ Remove selector lever cable -arrow A- from lever/selector shaft -arrow B- and move cable aside so that the end is free to move.
^ Move selector lever from " P" to " 1"
^ Check protective bellows at front of selector cable for damage. If protective bellow is damaged, replace selector cable.
^ Shift selector lever to "P"
- Selector lever mechanism and selector lever cable must move freely. If necessary, replace selector lever cable or check selector lever mechanism.
^ Install selector lever cable on selector lever.

Adjusting:





^ Shift selector lever to " P"
^ Loosen bolt -arrow-.
^ Move selector shaft lever to "P" on transmission. Locking lever must engage in park lock wheel and both front wheels must be blocked.
^ Tighten bolt -arrow- to 5 Nm (44 inch lbs.).
^ Install air cleaner.