Protective Relay Housing In Engine Compartment

Protective relay housing in engine compartment, removing and installing


CAUTION!
Before working on the electrical system:
- Determine the correct coding for the antitheft radio.
- Switch ignition off
- Disconnect the battery Ground (GND) strap.
- After reconnecting battery, re-code and check operation of the anti-theft radio.


Removing







- Insert screwdriver behind mounting tabs and carefully pry off.
- Remove complete protective housing toward front.
- Remove cover.
- Disconnect electrical connections.

Installing
- Connect electrical connections.
- Install cover.
- Install complete protective housing and engage properly.