Right Headlight, HID (With Range Control) Control Module

Right High Intensity Gas- discharge Lamp (with range control) Control Module -J568-, removing and installing


WARNING!
- HIGH VOLTAGE!
- Always disconnect battery Ground (GND) strap prior to servicing any parts of the HID lamp system marked with the yellow "HIGH VOLTAGE! "symbol.
- After disconnecting battery, briefly turn headlights on and off in order discharge any residual voltage.


The (slave) control module is located on the right/front inner long member.

Removing
- Remove front bumper cover.







- Remove bolts -arrows-on module retainer.
- Remove retainer and module together.
- Disconnect electrical connection from module.







- Remove screws and separate module from retainer.

Installing
Installation in reverse sequence of removal.