Intercooler: Service and Repair

Parts Of Charge Air Cooler, Removing And Installing







NOTE:
- All hose connections are secured with clamps.
- Charge air system must be properly sealed.
- Note assembly markings at hoses and components during installation.
- Note installation position of heat shield mats

1 Air duct
2 10 Nm
3 Charge Air Pressure Sensor -G31-
4 O-ring
5 Rubber grommet
- With sleeve
6 10 Nm
7 Intake hose
- between intake manifold and charge air cooler
8 Heat shield mats
- Note installed position
9 Screw clamp
- only vehicles with engine code APH
- Vehicles with engine code AWP, AWV with quick-release connection (with O-ring and retaining clip)
10 Connection hose
11 Air duct pipe
12 Bracket
13 Connection hose
14 Charge air cooler